service@lencolo37.com |
+86 18027002837(WhatsApp)
Search for Products.
Builder gel is used when you want to create length, thickness or add strength to the nail. You can apply builder gel to either natural nails for a non-chip overlay, or use it with nail tips to create extensions or enhancements. It’s much stronger than regular gel polish base coats, and the formula is a much thicker consistency to a normal base coat. They have high self-levelling properties which ensure a smooth foundation layer.
How long does builder gel last?
2-3 weeks. Though a manicure created with builder gel can last up to three weeks, this often depends on which brand you use and how well you apply it – plus, how well the old coat is removed. When applied on natural nails, a strong and healthy base is required.
Always make sure you follow your chosen gel brand’s instructions to get the best results. This often means only using products from your chosen gel nail system – not mixing one builder gel with another brand’s top coat, for example.
You also need to make sure you use the right LED or UV nail lamp for the correct amount of time.
When the builder gel begins to grow out, you can infill just like you would with acrylic, or remove the set and apply another straight away – providing the nail is still in good condition.
The way you use builder gel depends on the particular brand you buy. Some require you to use a primer or base coat first, while others, such as Glossify, can be applied straight to the nail for a speedier application.
If you are applying builder gel to the natural nail only, it can be applied and built up to the desired thickness and shape in a number of coats, curing between each layer. If you are extending the nail, simply apply your nail tip or form before applying the gel and creating the length.
Generally, the steps you would take to apply a builder gel would be something like this:
1. Prepare the nail – clean, file and buff the nails. Push back and trim the cuticle. Wipe the nail with a lint-free pad using nail cleanser or acetone.
2. Apply base coat or primer – if your builder gel requires you to use one. Cure under your nail lamp if needed. If you don’t need a primer, you can skip this step and save some time.
3. Apply the builder gel – if you are using a bottled builder gel, you can paint it on. If you have a pot of gel, you will need to use your own nail brush to pick up a small amount. Stay away from the cuticle and be sure to cover the free edge. Builder gel tends to ‘self-level’, so allow it to settle for a few seconds to make sure it is applied evenly.
4. Cure under LED/UV lamp – your chosen builder gel should state what type of lamp it needs to be used with and how long to cure it for.
5. Apply a second coat – if needed, apply your second coat and cure again.
6. Clean the nail – use a lint-free wipe and isopropyl alcohol to remove any tackiness.
7. File the nail – perfect your client’s desired shape and even out any areas that might be too thick.
8. Apply colour or top coat – wipe the nail clean again, and apply your top coat. If your client wants a different colour, paint on your gel polish and cure again first.
9. Finishing touches – once all your gel is applied and properly cured, your manicure is complete! Add a touch of cuticle oil and let your client know of any aftercare advice before they leave.
It depends. As a nail tech, you will probably have your fair share of clients asking you whether builder gel is better for their nails than acrylic.
However, it can be hard to answer this question as it is often a case of personal preference.
For example, builder gel might not appear to be as hard as acrylic, but it is more flexible and can actually be stronger. For more natural looking nails, builder gel is often preferred over acrylic as it can be applied quickly with a high-shine finish. Gel is also great for helping clients with easily broken nails maintain their natural nail length.
Many clients also believe that gel nails will damage their nails less than acrylic nails. The flexibility of builder gel does mean that they are less likely to cause a breakage. If you use a soak off formula, you can minimise damage during the removal, too, as less filing and buffing will be needed.
However, that’s not to say that acrylic is particularly bad for nails! If clients have really soft nails, acrylics can offer a suit of armour to protect them. So long as they are applied, cared for and removed properly by a trained nail technician, gels and acrylics should be equally safe.
If your client still can’t decide which to go with, keep some pictures of your best work handy to show them the different looks you can create with them.
If you are new to gel nails, you might be wondering what the difference is between the terms hard gel, soft gel and builder gel. Just what exactly are they all?!
Hard gels are used to build nail extensions as they can add length that most soft gels can’t. They are similar to acrylic nails in this aspect, but still need to be cured under an LED or UV lamp. To be removed, they usually need filing off, so can cause more damage to the natural nail.
Soft gels are incredibly popular with today’s clients as they are just as durable as a hard gel, but easier to remove. Also known as ‘soak off’ gels, they can gently be lifted away with acetone when needed.
Many of today’s soft gels, such as Glossify Builder Gel, come in a bottle with a brush and can be applied similar to a regular nail polish – though still need curing with a nail lamp. You can still add thickness and some length to the nail, though you won’t be able to extend them as much as you would with a hard gel. So, they are usually used for a more natural effect.
You can get both soft and hard builder gels to create shape and length.
However, it’s important to remember that both types of builder gel are different to regular gel polishes. These have a thinner consistency and while they do help keep the nail stronger, they aren’t as hardy as builder gels.
You can paint gel polish over the natural nail or over the top of your builder gel – just make sure you stay within the same gel system brand.
Lencolo modified UV polyurethane L-8440 has low curing heat release and good adhesion on human nails and artificial nails. It has the features of low shrinkage, good flexibility, good drying, good gloss, and little irritation to the skin; L-8442 has good color development, is suitable for nail polish color coat or color gel, compatible with dyes and color pastes, good flexibility, low odor, good LED curing effect, less irritating to the skin, it is a cost-effective product; Can be used in UV nail polish, UV adhesive etc.
Welcome to contact us anytime if you have any inquiry!
2022-08-03
2022-07-06