service@lencolo37.com |
+86 18027002837(WhatsApp)
Search for Products.
Application: This product is mostly used in LED -UV ink,and LED-UV adhesive system.
Contact UsDescription
Lencolo 5030 is a special photoinitiator of LED UV system, which has strong absorption at a specific wavelength (365nm-395nm). Various UV coatings and UV adhesives cured by special LED lamps.
Chemical & physical data
| Appearance | Light yellow liquid |
|---|---|
| Purity (%) | ≥99.5 |
| Volatile content(%) | ≤0.5 |
| Ash content(%) | ≤0.1 |
| Absorption peak(nm) | 365-395 |
Performance
The photoinitiator is very suitable for various LED UV systems.
Fast photocuring rate
Thorough curing, better bottom curing effect.
Application
This product is mostly used in LED -UV ink,and LED-UV adhesive system.
Usage method
It can be used alone or in combination with other photoinitiators, which can adjust the balance between surface curing and deep curing.
Addition: 0.5-1.5%
Users are advised to determine the optimum dosage by experiment before use.
Storage, shelf time and Packing
To prevent the product from polymerization and gelling, please keep it sealed and away from heat and light. Recommended storage temperature is not higher than 30°C. Unused products must be sealed and stored in a timely manner and cannot be stored in the open. Safe storage time is 6 months at room temperature( 25ºC) and under ventilation. 25KG/barrel
Tips:Lencolo 5030 has a good deep curing effect, especially UV black ink and thick UV adhesive, which can cure more completely. Pay attention to storage away from light, it will become gelled when exposed to light.
Related Products
| Product | Description |
|---|---|
| lencolo 5006D | Liquid 184 photoinitiator |
| lencolo 5007D | Liquid TPO deep photoinitiator |
| lencolo 5024 | Yellowing resistance photoinitiator |
| lencolo 5030 | Photoinitiator for LED |
| lencolo 5031B | Synergistic photoinitiator |
| Lencolo 5031D | Low odor synergistic photoinitiator |
| lencolo 5032 | Thin coating photoinitiator |
| lencolo 5033 | Black special photoinitiator |
| Lencolo 5040 | Special photoinitiator for 3D printing |
| lencolo 5050W | Water-based photoinitiator |
Note: Technical data represents typical values only. In view of the differences in formulas, production process, conditions, all the above statements must be adjusted according to the actual situation, our company does not make any promises. Our company reserves the right to reform its products without prior notice of any changes.