service@lencolo37.com |
+86 18027002837(WhatsApp)
Search for Products.
It's widely used in SPC floor, PVC floor, UV ink, UV plastic coating, UV nail glue, etc.
Chat Now Download TDSDescription
L-6318 is a special modified aromatic polyurethane acrylic UV resin with low viscosity, fast curing speed, high toughness of the coating, scratch resistance, and excellent matting property (adding a small amount of matte powder can make the matteness below 10 degrees), highly recommended for use in SPC floors, PVC flooring, UV ink, UV plastic coating and nail polish and other fields.
Technical data
| Appearance: | Colorless or light yellow transparent liquid |
|---|---|
| Viscosity (25ºC, CPS ) | 3000-7000 |
| Density (25℃,g/cm³) | 1.1±0.1 |
| UV component (%) | 100 |
| Acid value (mg KOH/g) | ≤3 |
| Shore hardness | 60D |
| Refractive index | 1.491 |
| Tensile strength (MPa)(ASTM D882) | 17.58 |
| Elongation at break (%)(ASTM D882) | 35.3 |
| Functional group | 3 |
Performance
Low viscosity, fast reaction speed;
Good toughness of the coating film, low shrinkage;
Excellent matting property
Applications
Widely used in SPC floor, PVC floor, UV ink, UV plastic coating, UV nail glue, etc.
Storage
In order to prevent the product from polymerization and gelation reactions, please seal it and store it away from heat sources and sunlight. It is recommended that the storage temperature is not higher than 30°C. Unused products must be sealed and stored in a timely manner and cannot be stored in the open. At room temperature of 25℃, under ventilation, the safe storage period is 6 months. When the temperature is lower than 40 degrees, it may precipitate and form a paste, which is a normal phenomenon and not affecting the performance. It will dissolve after heating and baking. 20KG/200KG/Barrel
Tips: L-6318 is very suitable for PVC floor and SPC floor.
Related Products
| Product | Description |
|---|---|
| Easy matting UV resin | |
| L-6313 | Tough 3F UV polyurethane resin |
| L-6314 | Easy matting 3F UV polyurethane resin |
| L-6315 | Lard-like 3-functional UV polyurethane |
| L-6318 | Easy Matting 3-functional UV Polyurethane |
| L-6317 | Low viscosity 3-functional UV polyurethane |
| L-6360 | 3F UV polyurethane resin |
| L-6904 | Easy matting 9F UV polyurethane resin |
| L-8321 | Wear-resistant easy-matting 9F UV resin |
| Recommended additives | |
| Lencolo 5012 | Anti-stain abrasionear-resistant wax slurry |
| Lencolo 5013 | Abrasion-resistant wax slurry |
| Lencolo 1108 | Special wetting dispersant for matte powder |
| Lencolo 1109 | Special wetting dispersant for matte powder |
UV floor varnish High chemical resistance UV resin Scratch-resistant UV resin
Note: Technical data represents typical values only. In view of the differences in formulas, production process, conditions, all the above statements must be adjusted according to the actual situation, our company does not make any promises. Our company reserves the right to reform its products without prior notice of any changes.