Application: L-61043 is an acrylic monomer suitable for photocuring reactions and can be used in UV polymerization reactions of various unsaturated systems such as UV coatings, UV inks, and UV adhesives. Used in sealant, solder mask ink, photoresist, ink, coating, dry film and other fields.
Contact UsDescription
Product:(PEG(200)DA) Polyethylene glycol(200)diacryla
CAS#26570-48-9
L-61043 is an acrylic compound of polyethylene glycol (N=4). In addition to the fast curing of acrylate, it also has the flexibility, low volatility and other properties of polyethylene glycol. It has outstanding characteristics of low skin irritation, low odor, light color, good miscibility, and good reaction speed and balance. It has a certain adhesion-promoting effect on various substrates. The cured film obtained by free radical initiation has both good toughness and hardness, and can also enhance wear resistance and scratch resistance.
Chemical & physical data
Appearance | Transparent liquid |
---|---|
Color number (APHA) | ≤100 |
Viscosity (25ºC, CPS) | 15-35 |
Water(%) | ≤0.2 |
Polymerization inhibitor (ppm) | 300-500 |
Refractive index | 1.463 |
Surface tension (dyne/cm 20ºC) | 40.1 |
Tg(℃) | 14 |
Functional group | 2 |
Performance
High water solubility, low skin irritation, low odor, low volatility
Application
L-61043 is an acrylic monomer suitable for photocuring reactions and can be used in UV polymerization reactions of various unsaturated systems such as UV coatings, UV inks, and UV adhesives. Used in sealant, solder mask ink, photoresist, ink, coating, dry film and other fields.
Storage, shelf time and Packing
To prevent the product from polymerization and gelling, please keep it sealed and away from heat and light. Recommended storage temperature is not higher than 30°C. Unused products must be sealed and stored in a timely manner and cannot be stored in the open. Safe storage time is 6 months at room temperature( 25ºC) and under ventilation. 25KG/200KG/barrel.
Tips:L-61043 has low skin irritation, low odor, light color, good miscibility, and good reaction speed and balance.
Note: Technical data represents typical values only. In view of the differences in formulas, production process, conditions, all the above statements must be adjusted according to the actual situation, our company does not make any promises. Our company reserves the right to reform its products without prior notice of any changes.