service@lencolo37.com | +86 18027002837(WhatsApp)
Search for Products.

Service Details

Home / Single Service
Lencolo 5031D  Low Odor Synergistic Photoinitiator has good curing promotion effect for for various mercury lamp UV systems

Lencolo 5031D Low Odor Synergistic Photoinitiator has good curing promotion effect for for various mercury lamp UV systems

Application: Suitable for various mercury lamp UV systems, also suitable for LED UV, LED UV ink, LED UV adhesive system, UV nail polish.

Contact Us

Description

Lencolo 5031D is a photoinitiator accelerator for special UV system, which can promote the reaction of various UV resins and has strong absorption for specific wavelengths (365nm-395nm). Various UV coatings and UV adhesives that can be cured by LED lamps can also be used in UV systems cured by mercury lamps to improve the surface dryness and crosslinking density of the system.


Chemical & physical data

AppearanceTransparent liquid
Purity (%)99.5
Volatile content(%)0.5
Ash content(%)0.1
Absorption peak(nm)365-395


Performance

Improve the UV curing rate, have a good promotion effect on various UV, make UV curing more thorough, higher conversion rate, better bottom curing effect

It is very suitable as a photoinitiator for various LED UV systems, making the coating surface dry more thoroughly.

Enhance the adhesion to metal, glass and polymer materials, improve wear resistance


Application

Suitable for various mercury lamp UV systems, also suitable for LED UV, LED UV ink, LED UV adhesive system, UV nail polish.


Usage

It is not recommended to be used alone, but can be used in combination with other photoinitiators to adjust the balance between surface curing and deep curing of the product.

Addition amount: 0.5~3%

Users are advised to conduct experiments to determine the optimal dosage before use.

Note: Store away from light, there is a risk of gelling when exposed to light.


Storage, shelf time and Packing

To prevent the product from polymerization and gelling, please keep it sealed and away from heat and light. Recommended storage temperature is not higher than 30°C. Unused products must be sealed and stored in a timely manner and cannot be stored in the open. Safe storage time is 6 months at room temperature( 25ºC) and under ventilation. 25KG/barrel


Tip: Lencolo 5031D has a good promotion effect on all kinds of UV, which makes UV curing more thorough, higher conversion rate, better bottom and surface curing effect, and improves wear resistance and scratch resistance.

Note: Technical data represents typical values only. In view of the differences in formulas, production process, conditions, all the above statements must be adjusted according to the actual situation, our company does not make any promises. Our company reserves the right to reform its products without prior notice of any changes.