Application: UV adhesive, 3D UV printing, UV nail polish, UV ink, UV coating, etc.
Contact Us Download TDSDescription
CAS #5117-12-4
Molecular weight (g/mol): 141.17
L-6102 Acmo is a special UV monomer with ultra-low viscosity, low odor, low volatility, low irritation, excellent balance of hardness and flexibility, and fast curing speed. Good adhesion to all kinds of substrates is very suitable for flexibility, adhesion and viscosity in high flexibility UV system.
Chemical & physical data
| Appearance: | Colorless or yellowish transparent liquid |
|---|---|
| Chroma(APHA) | ≤60 |
| Acid value (mgkOH/g) | ≤3 |
| Viscosity (cps@25ºC ) | 8~12 |
| Density (g/cm3, 25ºC) | 1.122 |
| Refractive index | 1.508 |
| Boiling Point (atmospheric pressure): | 158ºC(50mmHg) |
| Surface tension Dynes/cm, 20 ºC | 44.6mN/m |
| Glass transition temperature Tg, ºC | 145 |
Performance
The monofunctional monomer with low odor and low irritation can be miscible with water and can be used in aqueous UV system.
The reaction is faster than that of ordinary monofunctional monomers, which is equivalent to the speed of general 2-3 functional monomers
It is very flexible and has a certain hardness. It can be mixed with high-ranking official oligomer and added with a small amount to prepare hard and tough products
Good dispersion of pigments and dyes
Excellent adhesion, especially for difficult substrates such as PET / PE and PMMA.
Application:
UV adhesive, 3D UV printing, UV nail polish, UV ink, UV coating, etc.
Storage, shelf time and Packing
This product will be functional for 1 year as long as storing under normal temperature and keeping away from heat and light.
This Product will be packed into 20kg,200kg/drum.
Tip: ACMO is a special UV monomer with fast reaction speed, good adhesion and low viscosity.
The information contained in this TDS is intended as advice only and whilst the information is provided in utmost good faith and has been based on our best information currently available, is to be relied upon at the user's own risk. No representations or warranties are made with regards to its completeness or accuracy and no liability will be accepted by San Qi Chemical for damages of any nature whatsoever resulting from the use of or reliance on the information.
Welcome to visit our "Made in China" plateform，by clicking here.
Note: Technical data represents typical values only. In view of the differences in formulas, production process, conditions, all the above statements must be adjusted according to the actual situation, our company does not make any promises. Our company reserves the right to reform its products without prior notice of any changes.