Product Name: Photoinitiator for LED
Product model: Lencolo 5030
Lecolo 5030 is a photoinitiator for special LED-UV system. It has strong absorption for specific wavelength (365-395 nm). It is recommended for UV coatings and UV adhesives, especially used for LED lamp curing.
Chemical & physical data
1.Photoinitiators suitable for various LED-UV systems,especially the UV black ink and thick coated UV coatings.
2.Complete curing, better bottom curing effect.
3.It has fast curing rate.
This product is mostly used in LED -UV ink,and LED-UV adhesive system.
It can be used alone or in combination with other photoinitiators, which can adjust the balance between surface curing and deep curing.
Users are advised to determine the optimum dosage by experiment before use.
Storage, shelf time and Packing
This product will be functional for 1 year as long as storing under normal temperature and keeping away f-rom heat and light.
This Product will be packed into 25kgs/drum.
The information contained in this TDS is intended as advice only and whilst the information is provided in utmost good faith and has been based on our best information currently available, is to be relied upon at the user’s own risk. No representations or warranties are made with regards to its completeness or accuracy and no liability will be accepted by San Qi Chemical for damages of any nature whatsoever resulting f-rom the use of or reliance on the information.