Tip: Lencolo 3007F has good compatibility with various UV resins. 3007F has good anti-graffiti performance in UV system and has no influence on other properties.Contact Us Download TDS
Lencolo 3007F is a double-bond fluorine modified acrylic polymer, it has good compatibility with UV systems and it is especially suitable for anti-doodling and anti-fingerprint requirements for UV systems.
Chemical & physical data
|Components||Fluorine modified acrylic polymer|
It has a high water drop contact angle, up to 108 ° ~ 114 °
Adding this additive has no effect on steel wool, and is very suitable for UV bright and UV matte systems with high requirements on steel wool resistance and wear resistance
Promote film leveling, have strong anti fouling effect, make the film easy to clean, and can be used as anti graffiti additive
It is compatible with most solvent systems and can be used in solvent based and UV curing systems.
Various UV coatings and UV hardening fluids
Generally, the adding ratio to coating is 0.1 ~ 0.5%, which should be added at the last stage of the production process under high shear force.
Users are advised to determine the best addition amount through experiments before use.
Attention: Store away from light, no direct light!
Storage, shelf time and Packing
This product will be functional for 6 months as long as storing under normal temperature and keeping away from heat and light.
This Product will be packed into 25kgs/drum.
Tip: Lencolo 3007F has good compatibility with various UV resins. 3007F has good anti-graffiti performance in UV system and has no impact on other properties.
The information contained in this TDS is intended as advice only and whilst the information is provided in utmost good faith and has been based on our best information currently available, is to be relied upon at the user's own risk. No representations or warranties are made with regards to its completeness or accuracy and no liability will be accepted by San Qi Chemical for damages of any nature whatsoever resulting from the use of or reliance on the information.
Note: Technical data represents typical values only. In view of the differences in formulas, production process, conditions, all the above statements must be adjusted according to the actual situation, our company does not make any promises. Our company reserves the right to reform its products without prior notice of any changes.